Lgs-1300 Wholesale High Speed Digital Slitting Fabric Slitting Cutting Pet PVC PP Roll Paper Slitting Rewinding Machine

Product Description

Product Description

 

Straight knife, standard with 8pcs

 

The winding adopts A and B air expansion shaft structure, which is convenient for loading and unloading;

 

optional : round knife,suitable for paper ,fabric material
 

optional :slip shaft ,suitable for uneven material ,film etc.

 

 tension control part.

 

shaftless unwind

 

touch screen, shaftless for unwind

EPC device

 

Product Parameters

Use:
The machine is suitable for slitting BOPP, pet, CPP, CPE, PVC and other rolled materials. In the production process, the materials are cut and rewound according to different needs.

Performance and characteristics:
1. The machine adopts DC motor to maintain smooth operation during acceleration; (variable frequency speed regulation can also be adopted)
2. Automatic meter counting, alarm and other functions;
3. The winding adopts a inflatable shaft structure, which is convenient for loading and unloading;
4. The unwinding adopts photoelectric automatic deviation correction system, so that the irregular materials can be cut normally
5. Automatic discharge device for waste edge of flat knife longitudinal cutting
6. Hydraulic shaftless feeding, 3 inches.

Technical parameters
1. Width: 1300 type
2. Slitting thickness: 20g-300g / m2 (depending on different raw materials)
3. Maximum diameter of raw material unwinding: φ 700mm
4. Maximum diameter of raw material winding: φ 450mm
5. Maximum width of raw material for slitting: 1300mm
6. Double ball slip shaft of winding machine: φ 75mmx30mm
7. Number of reeling shafts at the same time: 2 (double shaft reeling)
8. Deviation correction accuracy: ± 0.5mm
9. Slitting accuracy: ± 0.5mm
10. Speed: 10-300m / min
11. Total power: 7KW
12. Body color: white cover white (other colors are optional)
13. Adopt automatic photoelectric deviation correction (depending on different raw materials and customer specific requirements)

Machine configuration

1. Unwinding part:
(1) The frame adopts steel plate structure
(2) Magnetic particle tension control: tension control range: 5-100n M
(3) One set of Ningxia 10kg brake is used for tension magnetic powder
4) The feeing shaft adoptsd the form of feeding without shaft, 1
(5) The transmission guide roller adopts aluminum guide rod and is subject to dynamic balance treatment
(6) The base material can be adjusted left, right and parallel: manual operation
(7) 1 set of photoelectric deviation correction system
 

Traction device:
(1) Structure type: active traction pneumatic compression type
(2) The pressing mode is controlled by air cylinder
(3) Compression cylinder specification: φ 50 * 25 2 pcs
(4) The pressing roller adopts rubber roller (specification: φ one hundred and ten × 1400mm) 1
(5) The driving roller adopts rubber roller (specification: φ one hundred and twenty × 1400mm) 1
(6) Driving mode: the main motor drives the main transmission shaft, and the main shaft drives the driving roller for traction

Winding device
(1) Structure: inflatable shaft (single shaft winding is also available)
(2) Adopt tile type inflatable shaft (specification: φ seventy-four × 1400mm) 2
(3) Ningxia magnetic powder clutch 5kg 2 pcs
(4) Compression mode: cylinde top sleeve structure and two back pressure shaft devices are adopted

waste discharge device:
(1) Discharging method: blowing waste
(2) The main motor adopts one three-phase asynchronous motor (specification: 0.75KW)

Control part: 1 piece
(1) The control system of the machine can be roughly divided into three parts: host control, tension control and other control.
(2) Host control: (Siemens PLC + HMI)
(3) Tension control: the unwinding tension, winding tension and control speed range are wide. It has excellent performance at low speed and high speed, and the winding effect is excellent.
(4) Attached with electronic meter counter; Alarm shutdown; Automatic length determination.
(5) The cutting length can be preset for shutdown

Supporting facilities: (the user is responsible for it
(1) Power supply: three-phase three wire air switch: voltage 380V 50Hz
(2) 1.5KW air compressor

 

Main Parameter:

Model	800	1100	1300	1600	1800
Width of unwind	≤800MM	≤1100MM	≤1300MM	≤1600MM	≤1800MM
Max.diameter	≤1000MM	≤1000MM	≤1000MM	≤1000MM	≤1000MM
Diameter of rewind	≤650MM	≤650MM	≤650MM	≤650MM	≤650MM
paper core size	76MM	76MM	76MM	76MM	76MM
Speed	0-300m\min	0-300m\min	0-300m\min	0-300m\min	0-300m\min
Motor power	5.5KW	5.5KW	5.5KW	7.5KW	7.5KW
Cutting width	0.5-800MM	10-1000MM	20-1300MM	25-1600MM	30-1800MM

Packaging & Shipping

 

Company Profile

 

Certifications

 

 

FAQ

 

Q: Are you manufacturer or trading company?
A:We are the manufacturer and have our own workers and factories.

Q:How long is the warranty period?
A: All of our products have 2 year warranty and whole life maintance

Q: What's the main market of your company?
A: We have customers all over the world

Q: What's your delivery time and payment Terms?
A: Normally,it need about 10-30 days.The exact time depends on your quantity.The payment terms always 30% deposits,70% to be paid before shipment.

Q: What package do you use for the product?
A:Be Coated with anti-corrosion oil, and covered with plastic film,  wooden box package need extra cost.

Q: Does your factory provide installation service?
A:Our engineer can go to customer factory to installation . buyer should prepare materials used to testing the machine in advance and should be responsible for the cost of supplier's technician, including round air tickets, visa cost, accommodation and salary 120-150USD/Day per person since the day start out until the day arriving at factory.

Q: Can we visit your machine operation in your factory?
A: Welcome to you go to our factory to see the machine operation.

Q: Where's your factory located? How can we visit there?
A: We are in Zhixin industry Zone, Ruian City,Zhejiang province,China.
You can by air to Wenzhou airport and by High-speed train to Rui'an Station

Our Exhibition

 

Customer Feedback